Combs Hall

Combs 001

Combs 002

Combs 003

Combs 004

Combs 009

Combs 011

Combs 012

Combs 025

Combs 111

Combs 112

Combs 114

Combs 139

Combs 211

Combs 213

Combs 214

Combs 215

Combs 236

Combs 237

Combs 322

Combs 348

Combs 349

Media Equipment Instructions - Combs 011

To project the computer image:

1. Turn on the computer at the Instructor Desk by pushing the button on the front of the computer (Please leave the computer on when finished)
2. At the Log in screen:
   
   • To log into the NETWORK (if you need access to network drives, H:, S: and all other assigned drives):
     
     • At the log in screen, enter your username with the full context (for example: .tjones.dept.staff.mwc)
     • Enter your network password (same as you use on your office computer)
     • Click OK
     • At the next log in screen, enter the appropriate Windows User Name:
       
       • Enter the username of Instructor in the User Name field; enter the correct password for the room in the password field, or
       • Enter the username of student; LEAVE THE PASSWORD FIELD BLANK
     • Click OK
   • To log into the COMPUTER ONLY (no network drive access):
     • At the log in screen, click the Workstation Only box.
     • Enter the appropriate User Name and password.
       
       • Enter the username of Instructor in the User Name field; enter the correct password for the room in the password field, or
       • Enter the username of student; LEAVE THE PASSWORD FIELD BLANK
     • Click OK
3. Be sure the slide switch located at the top right of the Projector remote is in the On position
4. Point the Projector remote toward the ceiling mounted projector and press the button
5. After a brief start up period, the projector will display a blue screen for approximately 30 seconds while it is warming up.
6. On the Projector remote, push the button. You will see Computer 2 on upper left of screen
7. This room does not have audio capability

To project a DVD:

1. Turn on the computer at the Instructor Desk by pushing the button on the front of the computer (Please leave the computer on when finished)
2. Using the CD/DVD Drive on the computer (push button on side to open and close drive) insert your disk (shiny side down) then close drive tray
3. Point the Projector remote toward the ceiling mounted projector and press the red button
4. After a brief start up period, the projector will display a blue start up image for approximately 30 seconds while it is warming up.
5. On the Projector remote, push the button. You will see Computer 1 in the upper left of screen
6. Windows Media Player should launch automatically. If a pop up window appears and you must choose how to play the DVD, choose Play DVD using Windows Media Player

Windows Media Player:

You may choose to start Windows Media Player manually:

1. Click on Start in the lower-left corner of computer screen
2. Click All Programs
3. Click Windows Media Player to launch the DVD player
4. Press the Play button in the lower-left corner of the window

To identify a button’s function allow your mouse to hover over the button and its function tip will appear. Use the mouse to click on DVD controls.

• Play, Pause and Stop buttons are located in the control panel
• To view the DVD image full screen, from the tool bar choose View > Full Screen or press ALT + Enter on the keyboard
• While in the full screen mode simply move the mouse and the controls will reappear.

You can control the DVD volume by:

• using the Volume Control in Windows Media Player
• using the Volume knob on the Speaker
• If no sound comes out of the speakers, make sure the volume is not muted on the computer:
  • Double Click the SPEAKER icon in the system tray. (The area at the bottom right of the screen where the time is located)
  • In the volume control window, adjust the Volume Control Slider, and then close the window
1. When finished playing the DVD:
   • Click on the Stop button
   • From the toolbar choose Play > Eject
   • Close the Windows Media Player by clicking on the Red X in the upper right corner of the screen.

To play an audio CD:

1. Turn on the computer at the Instructor Desk by pushing the button on the front of the computer (Please leave the computer on when finished)
2. Using the CD/DVD Drive on the computer (push button on side to open and close drive) insert your disk (shiny side down) then close drive tray
3. On the pop up window, choose Play Audio CD using Windows Media Player
• If you need to manually launch the Windows Media Player:
  • Click on Start in the lower-left corner of computer screen
  • Click All Programs
  • Click Windows Media Player to launch the DVD player
  • Press the Play button in the lower-left corner of the window
4. Use the mouse to click on track choices.
5. You can control the CD volume by:
   • using the Volume Control in Windows Media Player
   • using the Volume knob on the Computer Speakers
6. When finished, close Windows Media Player and remove your CD.
   • Push the button on the side of the CD/DVD Drive
   • From the menu bar choose Play > Eject

To play a VHS tape (for Equipment not in Lectern):

1. Turn on both the TV and the VCR located on the rolling cart.
2. Put the VHS tape into the VCR and press play. If no image shows on the screen, press the TV/VCR button on the VCR.
3. To adjust the volume, press the volume button on the TV.
4. Once finished, press the STOP button on the VCR, and then press the eject button to remove the tape.
5. Turn off both the TV and the VCR.

After Every Class:

1. To shut down the projector, point the Projector remote toward the projector and press the button twice
   • Log off the computer – Do not shut it down
   • Click on Start, Log off
2. Click Log off again
3. Roll up projection screen
4. Return remote to the table in front of the classroom

Available Equipment

 

QUESTIONS or PROBLEMS?

Contact the Help Desk 654-2255

Monday – Thursday: 8AM – 8PM, Friday: 8 AM – 5PM

http://www.umw.edu/technology/resources/multimediaenhanced_classro/default.php

If you find that any of these instructions are incorrect, unclear or inaccurate, please notify User Services at helpdesk@umw.edu